When recovering, you would usually have an anchor point located directly in front of your vehicle but often times you won’t always be so lucky. By doing this, it increases your pulling capacity and strengthens your winch. The block is meant to change direction of the recovery rope to get the straight angle you need.Ī pulley system is used in conjunction with a winch rope by looping the rope through the pulley before hooking to the vehicle, rock or tree in recovery. A snatch block can be opened to receive a bit of rope along any length of it. The Snatch Block is a pulley with a side plate that swings open. Always have a snatch block with you when off-roading to make that difficult recovery simple.

It is out of your way until that moment when you need it. The snatch block is extremely light and small which makes for easy stowing in any vehicle. Specifically designed smooth radius connection eye to be used with a 3/4″Soft Shackle or our Tree-Saver Soft-Shackle as an attachment, while still enabling the use of a standard 3/4″ bow shackle (D-ring). It’s precision made from aircraft grade aluminum with a revolutionary heavy duty self lubricating single bearing Delrin sheave that will never rust or require any maintenance, even after years of use. or more, this block weighs just under two pounds. If the anchor point isn’t secure or can’t handle the pressure, this too could result in disaster.īe sure to buy a high-quality snatch block for your winching and handling needs! Click the button below to browse SafetyLiftinGear's range.Heavy Duty Light-weight Snatch Block – Most snatch blocks weigh 8 lbs. With so much force resting on the snatch block, it’s imperative that the equipment is set up correctly and all components attached securely. In fact, the pressure on the line can be as much as twice that of the actual load being towed! If the pressure becomes too much and the block fails, the resulting slingshot effect can easily do a lot of damage. When used in conjunction with a winch, a huge amount of force passes through the snatch block. Snatch blocks can be dangerous if used incorrectly, so it’s important to you know what you’re doing. Swing Block - Normally used with vehicle winches and 4 x 4 off-roaders. Snatch Block with Shackle - Used in permanent and temporary rigging applications. Snatch Block with Hook - Normally used with wire rope hoists and winches during temporary applications. The addition of the snatch block around the tree allows you to redirect the course of the winch, pulling the heavy obstacle to the side, out of the road, clearing your path.

Using another tree (one that's still standing) as an anchor point for your snatch block, you can feed a cable from your truck through the snatch block, then fasten it to the fallen tree. You have a winch on your truck, and you need to pull the tree out of your path.

In order to understand how a snatch block works, imagine a fallen tree blocking a road. When used in conjunction with a winch, a snatch block can increase the winch’s power considerably, allowing for a smoother, easier winching process. Sturdy and durable, snatch blocks are ideal for transferring loads over short distances and are commonly used in recovery situations. Snatch blocks allow you to change the direction of a winch’s cable by off-setting the anchor point, allowing you to pull in a three-point motion. It's common for this method to produce a 100% increase in pulling or lifting capacity - beware of the extra force this has on fixing / anchor points. Snatch blocks are also used to increase the lifting or pulling capacity of wire hoists and winches. It is primarily designed for handling heavy goods, working as a pulley point that can redirect the course of a winch line. A snatch block is a heavy-duty pulley inside a metal casing.